Navigation

Fine chemicals & Pharma industry

Centrifuges for the fine chemical and Pharma industry

Our centrifuges for the fine chemical and pharmaceutical industry meet all international standards. The optimal design in accordance with the current GMP guidelines guarantees the highest product safety as well as easy handling and maintenance for the operating personnel. Thanks to the modular system, even complex applications with crystal breakage sensitive products or toxic active ingredients (HAPI) are no problem. Use our centrifuges as pilot plants, as laboratory centrifuges, for small-scale production or for continuous operation.

Fine Chemicals

Your Product	Your Application
Carbofuran C₁₂H₁₅NO₃	Agro chemicals	show Products
Herbizides Insectizides	Agro chemicals	show Products
Sodium bicarbonate refined NaHCO₃	Food industry	show Products
Sodium cyanide NaCN	Metallurgy	show Products
Pigments	Paint industry	show Products

Pharmaceuticals

Your Product	Your Application
Antibiotics Vitamines APIs (all kinds)	Health, pharmaceutical products	show Products
Sodium chloride NaCl	Pharmaceutical quality	show Products
Intermediates	Pharmaceutical products	show Products

Your Product

Your Application

Antibiotics
Vitamines
APIs (all kinds)

Health, pharmaceutical products

show Products

Sodium chloride
NaCl

Pharmaceutical quality

show Products

Intermediates

Pharmaceutical products

show Products

Sugar

Your Product	Your Application
Dextrose, Fructose C₆H₁₂O₆	Food industry	show Products

Your Product

Your Application

Dextrose, Fructose
C₆H₁₂O₆

Food industry

show Products

Expand all Close all

Claudio Savini

Board of Directors

Since 2005 we have been closely working with Ferrum in a great cooperation mood with all their teams, either for the Sales and for the Service Assistance. It was not always easy, because the market conditions, especially in Italy, are sometimes a bit difficult to overcome, but nonetheless I’m glad to say that we jointly acquired some very good successes. Nowadays Ferrum is one of the most important lines we have in our portfolio and we are extremely flattered to be part of this big family.

UCB

Bulle, Switzerland

Everything from one source! We as a long-standing customer of Ferrum are in the process of optimizing the production process with a very motivated and innovative Ferrum team. With the new CentriSense® solution, we expect to benefit from the following advantages after project completion: - Shorter cycle times - Improved product quality - Less mechanical stress for the product - Complete transparency and traceability thanks to process data recording

...more

Nitrogen fertilizer manufacturer

Europe

We would like to thank David Koch for high professional competence and responsibility during the repair of the pusher centrifuge P-80/2 in our ammonium sulfate plant. The repair was carried out at the highest qualitative level and within the required time.

...more

Monojit Chaudhuri

Director Operations at Nitrex Chemicals India Limited

In July 2020, a quick repair of worn sieves was essential to keep production downtime to a minimum. Travel restrictions due to Covid 19 pandemic made a visit of a Ferrum service technician impossible. Although the professional installation for safe and reliable operation of the centrifuge is vital and requires expertise and special skills, Ferrum supported us with Remote Service and guided us through the entire repair process efficiently. The support platform provided by Ferrum with its numerous useful functions has contributed significantly to this. We are very satisfied with the Remote Service solution and strongly recommend it to others.

...more

Björn Franzen

Plinke GmbH

In 2021, the processing of a new product was successfully tested on a rental centrifuge from Ferrum. The machine had to be optimally configured and adjusted to the product, which required a lot of expertise and special skills. Despite travel restrictions, the mentioned activities including test runs were carried out with the help of the reliable and timely Remote Service from a Ferrum Process Engineer until the centrifuge met the qualitative + quantitative requirements to our complete satisfaction.

...more

Chemical Manufacturer

Process Engineer

We are a Dutch company that is researching a solution to wash a waste stream. The idea was to do a test with a centrifuge on site to keep the test as close to the process as possible. We faced some difficulties to arrange a feed pump for this test. Ferrum showed that they are thinking with us and came with a feed pump that exactly fitted in our test setup. The machine and the pump arrived as scheduled. The test was carried out by two engineers from Ferrum. The cooperation with these people went as it should be. Room for discussion, lots of knowledge and time to explain what can be learned from the test results. Our company would recommend Ferrum as a reliable supplier for high quality machinery.

...more

Fertilizer Manufacturer

Europe

We have been operating two pusher centrifuges P-50/2 for water-soluble crystalline monoammonium phosphate since 2013 and 2016. The centrifuges were delivered on time and according to specifications and have been in completely automatic operation since then. They fully meet the performance parameters and have proven highly reliable.

...more

Why choose us

Whether you have a new project or a request for an existing system, your needs are in good hands with us. With 100 years of experience behind us, we can carry out reliable and custom-tailored installations anywhere in the world.

Reliable
for 100 years

We have been developing and building machines for the most challenging applications out there for over 100 years. From the first can seamer in 1917, through destoners and washers, all the way to the can seamers and centrifuges of today. Visit the link below to learn more about our 100 years of experience.

to the History

Global
service network

From Aruba to Zambia and every letter in between, our team and our partners are there to support you with all your requests. Ferrum Process Systems has its own companies in the USA, Germany, Poland, India, and China. In addition, a wide network of partners on all continents ensures that we can provide excellent service across the globe.

to your Contact

Tailor-made
solutions

Your needs and goals are what drives us, and only the best solution for you is good enough for us. Contact us for a consultation and we will provide you with options from our broad range of equipment for your individual solution.

go to Centrifuges

Contact

Our experienced consultation teams are there for you worldwide: highly qualified and with a personal touch custom-tailored to your specific needs. Contact us and we will be more than happy to put you in touch with the right contact person.